EXCURSION HXA20K - Master; Slave Connection

6
MASTER / SLAVE CONNECTION
MASTER AMPLIFIER
SLAVE AMPLIFIER
* Speaker
Impedance
2~8 ohms
TWIN any number HXA20K have same Signal, GAIN and Setup Settings via MASTER. connection allows of
1. Connect 1 amplifier to head unit and slide the MASTER/SLAVE/ to MASTER position. ( )
st
TWIN switch
2 S at all further HXA20K amplifiers at TWIN switch TWIN
3 MASTER TWIN Amps
4 Connect speaker cable each HXA20K Amplifier in the standard way of an single Amplifier connection.
. lide the MASTER/SLAVE/ to position. ( )
. Connect the and using the LINK cable provided in package as shown in the diagram.
.
The minimum impedance 1 .
In configuration the minimum impedance is 2 .
In mode, the minimum impedance 1 .
of each single HXA20K is
MASTER & SLAVE
MASTER & TWIN each HXA20K is
CLIPPING
POWER
ALARM
MODE
MASTER &
TWIN OUT
SLAVE &
TWIN IN
GAIN HPF L PF BOOST PHASE
0-180°
REMOTELEFT RIG HT
LOW LEV EL INPUT
20000 WATT x 1CH COMPETITION AMPLIFIER
CLIPPING
POWER
ALARM
MODE
MASTER &
TWIN OUT
SLAVE &
TWIN IN
GAIN HPF L PF BOOST PHASE
0-180°
REMOTELEFT RIG HT
LOW LEV EL INPUT
20000 WATT x 1CH COMPETITION AMPLIFIER
HEAD UNIT
MASTER
M connection allows of 2 mplifiers to work as mplifierASTER & SLAVE LINK/BRIDGE x HXA20K A one bigger A .
1. Connect 1 amplifier to head unit and slide the MASTER/SLAVE/ to MASTER position. ( )
st
TWIN switch
2 S at 2 amplifier TWIN switch SLAVE . lide the MASTER/SLAVE/ to position. ( )
. Connect the and using the LINK cable provided in package as shown in the diagram.
4. Connect speaker cable (+) on mplifier to ubwoofer (+)
5. Connect speaker cable (+) on mplifier to ubwoofer ( )
6. Connect speaker cable ( ) on to ( ) on mp using 8
nd
3 MASTER SLAVE Amp
MASTER A S
SLAVE A S
MASTER Terminal SLAVE A 2x GA OFC Power Cable.
SLAVE
TWIN CONNECTION
1 amplifier
st
2 amplifier
nd
3 amplifier
rd
CLIPPING
POWER
ALARM
GAIN HPF LPF BOOST PHASE
0-180°
REMOTELEFT RIGHT
LOW LEVEL INPUT
20000 WATT x 1CH COMPETITION AMPLIFIER
MODE
MASTER &
TWIN OUT
SLAVE &
TWIN IN
CLIPPING
POWER
ALARM
GAIN HPF LPF BOOST PHASE
0-180°
REMOTELEFT RIGHT
LOW LEVEL INPUT
20000 WATT x 1CH COMPETITION AMPLIFIER
MODE
MASTER &
TWIN OUT
SLAVE &
TWIN IN
CLIPPING
POWER
ALARM
GAIN HPF LPF BOOST PHASE
0-180°
REMOTELEFT RIGHT
LOW LEVEL INPUT
20000 WATT x 1CH COMPETITION AMPLIFIER
MODE
MASTER &
TWIN OUT
SLAVE &
TWIN IN
next
HEAD UNIT
Speaker
Impedance
1~4 ohms
Speaker
Impedance
1~4 ohms
Speaker
Impedance
1~4 ohms
MASTER
TWIN