Exerpeutic 4200 - Computer

FUNCTIONS：
SCAN: Displays all function TIME→DISTANCE→CALORIES→PULSE→
RPM/SPEED in sequence.
RPM: Displays the pedaling Rotation Per Minute. The RPM and SPEED will
switch to another display in every 6 seconds after exercise starts.
SPEED: Displays the user’s exercise speed.
TIME: 1.You can press “SET” button to set target time between 0:00 to 99:00 for
count down function.
2. It can be set up by the user or accumulated automatically for count up
function.
DISTANCE: 1.Your can press “SET” button to set target distance between 0:00 to
99:50 for count down function.
2. It can be set up by the user or accumulated automatically for count up
function.
CALORIES: 1.You can press “SET” button to set target calories between 0 to 9990 for
count down function.
2. It can be set up by the user or accumulated automatically for count up
function
PULSE: Displays the user’s pulse. User may set the target pulse. When pulse
value reaches to the target, the computer will alarm with “Beep” sound.
MODE
To confirm all settings.
SET
To set up the value of TIME, DISTANCE, CALORIES and PULSE.
You can hold the button to increase the value fast. (The computer
has to be in stop condition.)
RESET
To clear the set-up value. Press RESET key and hold for 2 seconds
to reset all
function figures.
RECOVERY
To test heart rate recovery status
COMPUTER
16