Need help?Do you have a question about the Exide 12/15 and is the answer not in the manual?
General| Battery Voltage | 12 V |
|---|---|
| Charging Current | 15 A |
| Input Voltage | 220-240 VAC |
| Output Current | 15 A |
| Battery Type | Lead-Acid, AGM, Gel |
| Protection Features | Short Circuit, Reverse Polarity |
Connect the charger's mains plug to a power socket.
Connect red clamp to positive (+), black clamp to negative (-).
Choose mode, battery size, and type or 13.7 V Supply.
Green lamp indicates the battery is fully charged.
Read safety, connect mains and battery terminals correctly.
Select mode, observe LED indications during charging.
Remove clamps, unplug, and store the charger safely.
General precautions for safe operation, handling, and environmental considerations.
Electrical safety for specific modes, temperature protection, and voltage variations.
Guidelines on user suitability, supervision, and preventing child access.
Explains automatic charging for lead-acid batteries and integrated safety functions.
Details the 13.7 V constant voltage power supply mode for maintenance.
Describes temperature compensation for optimal charging in varied conditions.
Explains the 5-step charging process based on battery type and size.
Red LED indicates cables are incorrectly connected to battery terminals.
Yellow LED does not change; battery voltage may be too low.
Red LED lights, yellow LED flashes; indicates battery defect or parallel load.
Details the EXIDE 12/15 as a computer-controlled charger.
Lists input voltage, current, charging specs, and ambient temperature.
Specifies lead-acid battery types, capacity, and cable lengths.
Includes dimensions, IP rating, weight, and manufacturer declaration.
To Next Page
