Need help?Do you have a question about the Exmark Lazer Z LZE and is the answer not in the manual?
General| Fuel Type | Gasoline |
|---|---|
| Transmission | Hydrostatic |
| Drive Wheels | Rear |
| Deck Material | Steel |
| Wheel Size - Front | 13 inches |
Identifies important safety messages using the Safety Alert Symbol to avoid accidents.
Provides fundamental safety instructions and guidelines for operating the machine safely.
Details engine, fuel, electrical, and safety interlock systems for various mower configurations.
Describes mower controls, seat types for X, S, E-Series, and their adjustments.
Information on hydrostatic drive systems, pumps, motors, tires, and wheels.
Details cutting deck, drive systems, dimensions, weight, tread width, and wheel base.
Covers accessory weight impact, torque requirements, and thread locking adhesives.
Identifies major parts of the mower, including ROPS, controls, seat belt, and parking brake.
Familiarizes operator with controls, motion levers, indicators, and displays like LDU and Hour Meter.
Step-by-step guide for safely starting, stopping the engine, engaging PTO, and handling deck wings.
Guidelines for driving the machine, including forward, reverse, turning, and cautions.
Procedures for adjusting cutting height on center and wing decks, and anti-scalp rollers.
Procedure for adjusting the parking brake and electric clutch for proper functionality.
Instructions for adjusting motion control linkage, handle, damper, and tracking for optimal operation.
Procedures for parking, cleaning, and securing the machine after use.
Guidelines for safely securing the mower for transport on a trailer or truck.
Essential safety practices and warnings before performing any maintenance tasks on the machine.
Details service intervals and procedures for routine tasks like oil changes, filter replacements, and lubrication.
Covers engine, battery, and oil level checks, as well as filter replacements and lubrication.
Procedures to verify the correct operation of safety interlock features for starting and shutdown.
Instructions for checking mower blades, ROPS knobs, wing deck bushings, and seat belt.
Covers wheel hub torque, spark arrester checks, thread locking adhesives, and grease types.
Steps to level the mower deck on non-wing and wing deck models, including center and wing deck adjustments.
Procedure for adjusting the parking brake and electric clutch for proper functionality.
Instructions for adjusting motion control linkage, handle, damper, and tracking for optimal operation.
Instructions for adjusting caster pivot and wheel hub bearing pre-load.
Wiring diagrams for various engine models (Kawasaki, Kohler, Briggs) including EFI and RED equipped systems.
Schematics illustrating the main hydraulic system and the wing deck lift hydraulic system.
Explains Prop 65, its applicability, warning comparison to federal limits, and reasons for inclusion.
To Next Page