Exmark Metro 26 User Manual (English)

Other manuals for Exmark Metro 26

Questions and Answers:

M
maurice23Aug 26, 2025
What to do if Exmark Metro 26 engine does not start?
- V
  Veronica LoweAug 26, 2025
  If your Exmark lawn mower engine isn't starting, several factors could be at play. First, ensure the fuel tank isn't empty and the fuel is fresh; drain and refill if needed. If that doesn't work, make sure the throttle lever is in the Choke position. Check that the wire is connected to the spark plug. Finally, inspect the spark plug for any issues like pitting, fouling, or an incorrect gap; adjust or replace it accordingly. If the problem persists, contact an Authorized Service Dealer.
M
Molly HallAug 25, 2025
Why does my Exmark Metro 26 Lawn Mower engine start hard or lose power?
- L
  larry53Aug 26, 2025
  If your Exmark Lawn Mower engine starts hard or loses power, consider these potential causes. Start by draining any stale fuel from the tank and refilling it with fresh gasoline. Check the fuel cap vent hole to ensure it's not blocked; clean or replace the cap if needed. A dirty air filter can also restrict airflow, so clean the air filter pre-cleaner or replace the paper air filter. Make sure that the underside of the lawn mower deck is free of clippings and debris. Inspect the spark plug for damage and correct the gap if needed, replacing the plug if it's severely pitted or cracked. Lastly, check the engine oil level and condition, adding or changing the oil as necessary.
R
Robert RodriguezAug 25, 2025
How to fix an Exmark Metro 26 when the engine does not start?
- J
  Joy RasmussenAug 25, 2025
  If your Exmark Lawn Mower engine won't start, several factors could be at play. First, ensure the fuel tank isn't empty and that you're using fresh gasoline. If stale fuel is the issue, drain the tank and refill it. Next, check that the throttle lever is in the Choke position. Also, make sure the wire is securely connected to the spark plug. Finally, inspect the spark plug itself for any signs of damage like pitting, fouling, or cracks. If necessary, adjust the gap or replace the spark plug.