D
Dana KingAug 1, 2025
What to do if my Exmark Metro HP engine will not start?
- Ccharles53Aug 1, 2025
If your Exmark Lawn Mower engine won't start, try these steps: * Ensure the choke is in the correct position ('ON' for a cold engine, 'OFF' for a warm engine). * For B&S and 15 & 17 HP Kawasaki engines, check that the key switch is in the 'ON' position. * Confirm the transmission is in the 'true neutral' position. * Make sure the blades are disengaged and the blade switch is depressed. * Verify there's fuel in the tank and the fuel valve is open. * Check that the spark plug wire(s) are properly connected. * Inspect for loose or faulty wiring connections, disconnecting connectors carefully. * Look for and clean any corrosion at wiring connections with electrical contact cleaner, apply dielectric grease, and reconnect.