Exmark QUEST S Series - Page 11

Safety
decal144-5288
144-5288
Thismachinecomplieswiththeindustrystandardstabilitytestinthestaticlateralandlongitudinaltestswiththe
maximumrecommendedslopeindicatedonthedecal.Itisimportantthateachoperatorreviewtheslopeoperation
instructionsintheoperator’smanualandreviewtheconditionsinwhichthemachineisbeingoperatedtodetermine
ifthemachinemaybeoperatedintheconditionsthatdayandonthatsite.Changestoterraincanresultina
changeinslopeoperationforanymachine.
1.Warning—ReadtheOperator'sManual.4.Runover/backoverhazard—DoNotcarrypassengers;
lookbehindanddownwhenmowinginreverse.
2.Cutting/dismembermenthazardofthengersor
hand—keephandsandfeetawayfrommovingparts;keep
allguardsandshieldsinplace.
5.Ramphazard—whenloadingontoatrailer,donotuse
dualramps;onlyuseasingularrampwideenoughforthe
machineandthathasaninclinelessthan15degrees;
backuptheramp(inreverse)anddriveforwardoffthe
ramp.
3.Thrownobjecthazard—Keepbystandersaway,pickup
debrisbeforeoperating,andkeepthedeectorshield
down.
6.Tippinghazardonslopes—DoNotuseonslopesnear
openwater;DoNotuseonslopesgreaterthan15
degrees.
11