14
On the Register Camera screen in Scoutek, select
either Automatic Registration or Manual Registration.
For Automatic Registration, use your mobile device’s
camera to capture the information displayed on your
Render camera’s screen. Once the values have been
captured and input into their corresponding fields, enter
a camera name and click the Register Camera button.
For Manual Registration, select the Render camera
model, enter a camera name and enter the information
which is displaying on the camera screen then click the
Register Camera button.
Once you have successfully registered a camera, you
will be taken to My Account automatically to activate it.
If you have multiple cameras you wish to register and
activate, you may register all of them first by repeating
these steps for each camera before continuing with the
Activate a Camera process.
ACTIVATE YOUR CAMERA:
If you were not automatically taken to My Account, in
Scoutek on the home screen, open the side menu on the
left and select My Account.
If this is the first time you have activated a camera be
sure to select a Share Plan. Select a reasonable amount
of data you expect your camera(s) to need. This is the
amount of data that is shared across all cameras and can
be changed at a later time.
To Next Page
Loading...
