24
TIME STAMP:
This is the info strip at the bottom of each photo/video. In
this section you can either turn the strip on or off.
TEMPERATURE:
This menu option gives you the ability to change from
Celsius to Fahrenheit. This data is shown on the info strip at
the bottom of each photo/video.
FREQUENCY:
This option allows you to change the camera frequency.
Cameras in the western hemisphere should be operated at
60Hz.
CAMERA NAME:
Choose a name for your camera between 1-13 characters.
This will be included in the info strip at the bottom of each
photo/video. To delete characters use the back arrow.
SECURITY ENABLE:
You can setup a 5 digit passcode that will be required every
time that you get back into your camera. You can select on
or off, when you select on you will be required to enter the
desired code.
To Next Page
Loading...
