Exor eSMART07M - Safety Instruction; Installation Procedure

17
MANUGENESMARTxx - Version 2.01
© 2018 EXOR International S.p.A. - Subject to change without notice
4 Technical Data
4.4 Installation Procedure
Place the xing brackets contained in the xing kit as shown in gure (Fig. 4.5).
4.3 Safety instruction
For all installation notes, please refer to the Installation Guide provided with the product.
!

CAUTION
Tightening torque: 75Ncm or screw each xing screw until the bezel corner gets in contact with the panel.