Expert EX-9132C-2 - Digital I;O Functionality

11
Digital I/O
Through
EX-9132C-2 , D I/O can transform the status of sensor into the TCP/IP
package data and send out by Ethernet Data Stream (The
EX-9132C-2 must
indicate the IP address and COM Port) or activate the indicated Digital output
(Remote WinSock must indicate the
EX-9132C-2). Connect the data wires between
the
EX-9132C-2 and the RS-485/RS-422 device. Follow the parameter setup
procedures to configure the converter (see the following chapters).