Need help?Do you have a question about the Expert EX-9132C-2 and is the answer not in the manual?
General introduction to the EX-9132C-2 converter and its purpose.
Visual representation of the EX-9132C-2's internal architecture and components.
Highlights the key functionalities and capabilities of the EX-9132C-2.
Lists the technical details and parameters of the EX-9132C-2.
Lists all items included in the EX-9132C-2 converter package.
Visual guide to the external panels and components of the EX-9132C-2.
Details the components located on the top surface of the EX-9132C-2.
Details the components located on the right side of the EX-9132C-2.
Details the components located on the left side of the EX-9132C-2.
Details the components located on the rear side of the EX-9132C-2.
Explains the meaning and status of each LED on the EX-9132C-2.
Describes the serial ports and their connectivity options.
Explains the usage of the digital input/output pins.
Provides diagrams for connecting serial devices via RS-232, RS-422, and RS-485.
Step-by-step guide for connecting the power supply to the EX-9132C-2.
Instructions for connecting the EX-9132C-2 to a network via Ethernet.
How to perform a factory reset using the reset button.
Guide to setting the initial IP address for the EX-9132C-2.
Using the EXBrowser tool for converter management and detection.
How to check the status and information of converters using EXBrowser.
Steps to change the IP address of the EX-9132C-2 via EXBrowser.
Steps to change the MAC address of the EX-9132C-2 via EXBrowser.
Configuring the EX-9132C-2 using a web browser interface.
Process for accessing the converter's web interface login page.
Explanation of fields present on the web login screen.
How to set, manage, and reset the converter's password.
Accessing and modifying detailed converter parameters via the web.
Detailed description of each configurable parameter.
Configuration options for the first serial port (RS-232).
Understanding port numbers and socket types for serial communication.
Configuration options for the second serial port (RS-232/422/485).
Explanation of serial interface types (RS-232, RS-485, RS-422).
Steps for updating the converter's firmware and settings.
Procedure to reset all settings to factory defaults.
Using Hyper Terminal to verify TCP/IP Winsock connectivity.
Using Hyper Terminal to verify COM port serial communication.
Verifying data flow between COM and TCP/IP terminals.
Troubleshooting common issues with EXBrowser detecting network devices.
Resolving problems encountered when using Internet Explorer for setup.
Pin configuration for the DC power input connector.
Pinout details for the RJ-45 Ethernet port.
Pinout details for the 9-pin RS-232 serial port.
Illustrates how to wire a serial device using RS-232.
Pinout details for the 4-pin RS-422 serial port.
Illustrates how to wire a serial device using RS-422.
Illustrates how to wire a serial device using RS-485.
General| Model | EX-9132C-2 |
|---|---|
| Type | Media Converter |
| Wavelength | 1310 nm |
| Operating Temperature | 0°C to 50°C |
| Power Supply | 5V DC |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% ~ 90% RH |
To Next Page