Name: Explore Scientific WSX1001
Brand: Explore Scientific
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SETUP WI-FI CONNECTION

1. When you  rst power up the console, or press and hold the [ SENSOR / WI-FI ]key for 6

seconds in normal mode, the console LCD will show "AP" and " " icon to signify that it has

entered AP (access point) mode, and is ready for WI-FI settings.

2. Use the smart phone, tablet, or computer to connect to the console through WI-FI.

3. In PC choose WiFi network settings or In Android / iOS choose setting

WI-FI to select the

console’s SSID: PWS-XXXXXX in the list and it will need several second to connect.

PWS-XXXXXX

PC WI-FI network interface Android WI-FI network interface

4. Once connected, enter the following IP address into your internet browser’s address bar, to

access the console’s web interface:

http://192.168.1.1

NOTE :

- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.

- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or

Opera.

Questions and Answers:

Need help?

Do you have a question about the Explore Scientific WSX1001 and is the answer not in the manual?

Explore Scientific WSX1001 Specifications

General

Brand	Explore Scientific
Model	WSX1001
Category	Weather Station
Wireless Transmission	Yes
Display Type	LCD
Power Source (Remote Sensor)	Batteries
Memory Function	Yes
Alarm Function	Yes
Backlight	Yes
Indoor Humidity Range	20% to 95%
Outdoor Humidity Range	20% to 95%
Outdoor Sensor Range	100 meters
Power Source (Base Station)	AC adapter
Weather Parameters Measured	Temperature, humidity, wind speed, rainfall
Mounting Type	Wall Mount
Indoor Temperature Range	0°C to 50°C
Wireless Range	100 meters