Expobar ZENITH Manual - Operation and Adjustments; Grinding Fineness Adjustment; Dose Adjustment for Manual;Automatic Models; Ground Coffee Lever Adjustment for Automatic

To Next Page

To Previous Page

ZENITH

Grindernenessadjustment

Grinder dose adjustment ZENITH Manual and Automatic

Usethegrindingadjustmentknobtosetthegrindingneness.

Use the dial under the doser lid to adjust the amount in each dose.

Increase Decrease

Note:

Turntheadjustingknobclockwisetoincreasegrindingneness

or counter-clockwise to increase the grain size.

Note:

Turn the dial clockwise to reduce the amount or counter-

clockwise to increase it.

Note:

This setting is stepless and needs to be gradually changed. Grind

some coffee between every two notches change.

WARNING!

If the knob is rotated one turn with a stationary motor, the grinder

may stop.

OPERATION

Ground coffee lever adjustment ZENITH Automatic

Toadjustthelevelofgroundcoffeeinthedoser,usetheagunderthe

lid of the doser group.

 Usethetwoslotsinthebottompartoftheagtoadjustthelevelof

thecoffeeinthedoser.Withtheagmoveddownwards,itispossibleto

work with a low level of ground coffee, while if it is moved upwards, it

is possible to work with a high level of ground coffee inside the doser.

We advise against operating fully automatic grinders and dosers when

thecoffeelevelagistoolow,sincethiscouldinuencetheregularity

of the doses.