Note.
Machines with the “EL MOTOR WITH THERMAL PROTECTION” sign are equipped with a device which protects the
motor from overheating.
When this device is activated, do not attempt to operate the machine: isolate the machine from the power supply
and eliminate the cause of the problem before re-starting.
This grinder dispenser has been designed for
professional use by trained personnel.
The grinder/dispenser must be used only for the
application for which it was designed; that is, grinding
roasted coffee beans. Any other use are considered
improper and potentially dangerous.
The manufacturer shall not be held responsible for
damages deriving from improper or erroneous use of
the machine.
The appliance must not be used by children or
people with reduced, physical, sensorial or mental
abilities. It must also never be used by people without
the necessary skills and experience unless under
supervision or during training.
Do not allow children to play with this equipment at
any time.
The machine is not designed for use in environmental
conditions outside the -5 °C to +40 °C range.
The user must respect the general safety regulations in
force in the country in which the machine is installed
and shall be responsible for ensuring that periodic
machine maintenance is correctly done.
The persons installing and using the machine and doing
machine maintenance shall inform the manufacturer
of any defects or damages due to wear that might
jeopardize the original safety features of the machine.
The installer shall be responsible for checking that
the machine is installed and operated in a suitable
environmental condition thus not creating health or
safety hazards for those using the machine.
Any responsibility deriving from components
manufactured and installed on the machine shall be
assumed by the respective manufacturers; responsibility
attributable to the persons authorized to use the
machine shall be assumed by the customer.
The machine is designed for 24-hour intermittent
service. The machine components are designed and
built to ensure at least 1000 hours’ operation.
Good cleaning and maintenance also contribute to
ensure long machine life.
GENERAL
Intended use
i
To Next Page
Loading...
Need help?
General