R
19
PROGRAMMING
Continuous dispensing mode activation
By pressing both keys and the continuous
mode is activated.
Both dose keys light up and the continuous dispensing
symbol appears
.
By pressing the grinding start key for more than 0.3
seconds, continuous dispensing is activated until the
grinding activation key is released.
By pressing one of the keys or you return to
the automatic dose mode.
Dose dispensing and setting (display)
By pressing the key for one dose this icon lights
upandthecupislledduringdispensing.
By pressing the grinding start key for more than 0.3
seconds, dispensing and countdown until zero is stared.
Once dispensing is completed, the countdown zero
returns to its set value after one second.
The single dose counter is increased of 1.
By pressing the key for two doses this icon lights
upandthecupislledduringdispensing.
By pressing the grinding start key for more than 0.3
seconds, dispensing and countdown until zero are
activated.
Once dispensing is completed, the countdown zero
returns to its set value after one second.
The double dose counter is increased of 1.
By pressing the increasing key or the decreasing
key
the dispensing time of the selected dose is
increased or decreased.
Dispensing time
of preset 1 coffee dose
Dispensing visualization
of 1 coffee dose
Counter of dispensed
1 coffee dose
Continuous
dispensing enabled
Padlock (locked
programming)
Dispensing time
of preset 2 coffee dose
Dispensing visualization
of 2 coffee dose
Counter of dispensed
2 coffee dose
Grinder setting ZENITH On Demand
Appliance switch-on
Note:
Whenswitchingtheapplianceonforthersttimeitisconguredwithfactorysettings.Changeofsettings
willbeautomaticallysavedanduserdenedsettingswillbeloadedautomaticallyifthegrinderisrestarted.
i
When switching the appliance on, the following screen is shown for 7.5
seconds.
ZENITH On Demand
To Next Page
Loading...