Extec C-12 CRUSHER - Weekly Maintenance Schedule (Lubrication & Belts); Weekly Bearing Greasing Requirements; Belt Rubber and Scraper Adjustments

C-12 CRUSHER
WEEKLY MAINTENANCE SCHEDULE Cont.
GREASING BEARINGS:-
Using suitable equipment, all bearings must be greased every week. See following chart for details of grease
points and types.
WARNING:- NEVER USE GREASE CONTAINING MOLYBDENUM. DOING SO MAY CAUSE
DAMAGE TO MACHINE PARTS AND WILL INVALIDATE ANY WARRANTY.
Magnet Conveyor
Bearings
50 Grams/40 Hrs
Grease EP2
Main Conveyor Bearings
50 Grams/100 Hrs
Grease EP2
Main Conveyor Bearings
50 Grams/100 Hrs
Grease EP2
Side Conveyor Bearings
50 Grams/100 Hrs
Grease EP2
Side Conveyor
Bearings
50 Grams/100 Hrs
Grease EP2
Torque Arm
Bearings
50 Grams/40 Hrs
Grease LGHQ3/18
Frame & Jawstock
Bearings
40 Grams/ 8 Hrs
Grease EP2
General Bearing Housings. Main Conveyor lower bearings Side Conveyor lower bearings.
Torque Arm motor bearings. Torque Arm shaft bearings.
Jawstock shaft & frame
bearings.
30