480846 V2.3 7/09
15
Electrical Specifications
Unless otherwise stated, the specifications hold under the following conditions:
• The meter is located in the far-field of a source, the sensor head is pointed towards
the source.
• Ambient temperature: +23±3
• Relative air humidity: 25% to 75%
Sensor type: Electrical field (E)
Frequency range: 10MHz to 8GHz
Specified measurement range:
CW signal (f > 50MHz)
: 20mV/m to 108.0V/m
53
μA/m to 286.4mA/m
1
μW/m
2
to 30.93W/m
2
0
μW/cm
2
to 3.093mW/cm
2
Dynamic range: Typically 75dB
Absolute error at 1 V/m & 50 MHz: ±
1.0dB
Frequency response:
Sensor (with typical CAL factors)
: ±1.0dB (50MHz to 1.9GHz)
±2.4dB (1.9GHz to 8GHz)
Isotropy deviation: Typically ±1.0dB (f>50MHz)
Overload limit: 10.61mW/cm
2
(200V/m)
Thermal response (0 to 50°): ±0.5dB
To Next Page
Loading...
