13 BR200-BR250-KITS_en-GB_v9.1 3/20
Specifications
CAMERA and CAMERA CONTROLLER
Imaging sensor CMOS
Total pixels (NTSC) BR200: 712 x 486; BR250, BR250-4, BR250-5: 640 x 480
Horizontal view angle BR200: 50 degrees; BR250: 45 degrees; BR250-4: 63 degrees;
BR250-5: 48 degrees
Focal distance BR200: 20cm (8”); BR250: 10cm (4”); BR250-4: 6cm (2.4”);
BR250-5: 5cm (2”)
Minimum illumination 0 Lux
Wireless transmission frequency 2.4 GHz
Wireless modulation type Frequency Modulation (FM)
Wireless bandwidth 18MHz
Wireless range 10m (33 ft.) maximum (unobstructed)
Waterproof capacity IP67 (imager head only)
Operating temperature -10°C~+50°C (+14°F~+122°F)
Power supply 4 x ‘AA’ batteries
Dimensions (controller) 186 x 145 x 41mm (7.3 x 5.7 x 1.6”) excluding flex cable
Weight (controller) BR200: 530g (1.2 lbs.); BR250: 450g (1.0 lbs.); BR250-4: 450g (1.0 lbs.);
BR250-5 381g (13.4oz)
Camera-head diameter BR200: 17mm (0.67”); BR250: 9mm (0.36”); BR250-4: 4.5mm (0.17”):
BR250-5 5.2mm (0.20”)
MONITOR
Screen type 3.5” Color TFT
Effective pixels 320 (R.G.B.) x 240
Video system PAL/NTSC
Transmission frequency 2.4 GHz (Channel 4)
AC adapter 5VDC, (100-240Vac), adapters for US, UK, EU, AUS
Consumption current (Max.) 500mA
Charge time 3 hours
Operation time 2 hours
Video output level 0.9-1.3VP-P@75Ώ
Receiving sensitivity ≤-85dBm
Operating temperature -10°C~+50°C (+14°F~+122°F)
Operating humidity (Max.) 15~85%RH
Dimensions (W x D x H) 100 x 70 x 25mm (4.0 x 2.7 x 1.0”)
Weight 140g (5.0 oz.)
FCC Information
This device complies with part 15 of the FCC rules.
BR200/BR250/BR250-4/BR250-5: FCC-ID TW5GB8802-GB8803
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired
operation.
To Next Page
Loading...
Need help?
General
