DL150-EU-EN V2.5 5/13
2
Introduction
Congratulations on your purchase of this Voltage or Current datalogger. With this meter, you can
monitor and log data over long periods of time and then easily transfer the data to a pc for viewing
and evaluation. The LCD display provides real time data, Max/Min data and time information. This
meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable
service.
Safety
Warning!
Do not attempt to make measurement in flammable gaseous areas!
When testing a non-insulated cable, pay attention to avoid short circuits.
Do not attempt to use the instrument when your hand is wet!
Do not input over range during measurements.
Never open the battery cover during measurements.
Stop using the instrument when there is any structural defect or exposed metal parts.
Do not install substitute parts or make modifications on the meter.
Never replace the battery in moist areas.
Ensure the meter is disconnected and switch off before opening the battery cover to replace
the battery.
Do not attempt to place the instrument in high vibration areas.
Do not expose the meter to direct sunlight, high temperature and high moisture environment.
Switch off the meter after use. Remove the AAA batteries when the meter will be stored for a
period of time..
When cleaning, do not use abrasives or solvents on the meter, use a damp cloth and mild
detergent only.
To Next Page
Loading...
Need help?
General
