Name: Extech Instruments TM100
Brand: Extech Instruments
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TM100 V1.2 3/110

WARNING

To avoid electrical shock or personal injury, do not apply more than

20Vrms between the thermocouple inputs or between the thermocouple

and earth ground

Introduction

Congratulations on your purchase of the Extech TM100 Digital Thermometer with K/J

single-type input. This meter is shipped fully tested and calibrated and, with proper use,

will provide years of reliable service.

Safety

To prevent personal injury or meter damage, use the meter only as specified in this

guide

Meter Description

Meter

1. Thermocouple input connector

2. Function buttons (Power, Enter, C-F-K)

3. Function buttons (Hold, MAX/MIN, Set)

4. LCD display

5. Battery compartment

Display

1. Setup

2. Offset option

3. Hold mode

4. Auto power off

5. Upper display T1 reading

6. Temperature units

7. Lower display (max, min,

avg, offset value of T1)

8. Max, Min and Average

9. Time display

10. K/J type thermocouple

11. Low Battery

Questions and Answers:

Need help?

Do you have a question about the Extech Instruments TM100 and is the answer not in the manual?

Extech Instruments TM100 Specifications

Temperature Specifications

K type thermocouples temperature range	-200°C to 1372°C (-328°F to 2501°F)
J type thermocouples temperature range	-210°C to 1100°C (-346°F to 2012°F)
Temperature accuracy above -100°C	± [0.15%rgd+1°C (1.8°F)]
Temperature accuracy below -100°C	± [0.5%rgd+2°C (3.6°F)]

Display

Display resolution below 1000	0.1°C /°F /°K
Display resolution above 1000	1°C /°F /°K

Environmental Conditions

Battery