Need help?Do you have a question about the Extech Instruments SDL200 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Data Logging | Yes |
| Display | LCD |
| Interface | USB |
| Battery Type | 9V battery |
| Response Time | 500 ms |
| Distance to Spot Ratio | 12:1 |
| Resolution | 0.1°C / 0.1°F |
| Emissivity | Adjustable 0.10 to 1.00 |
Provides a welcome message and overview of the Extech SDL200 thermometer.
Lists and describes the physical parts of the thermometer meter.
Identifies and explains the various elements displayed on the meter's LCD screen.
Instructions for powering the meter on and off.
Guides on connecting RTD and thermocouple probes to the meter.
Explains how to enter setup mode and view basic configuration settings.
Procedures for setting the internal clock and configuring the data logging sampling rate.
Configure auto power off functionality and the audible beeper.
Format the SD card and select temperature units and sensor types.
Details on basic thermocouple and T1-T2 difference measurements.
Details on basic RTD and T1-T2 difference measurements.
Instructions for freezing a measurement on the display.
How to record, view, and clear maximum and minimum readings.
Procedure to adjust the offset for thermocouple inputs.
Procedure to adjust the offset for RTD inputs.
How to turn the display backlight on or off.
Overview of manual and automatic datalogging methods.
Details on SD card insertion, formatting, and data storage.
Steps for manually logging readings to the SD card.
Steps for initiating and managing automatic data logging.
Guide for transferring logged data from the SD card to a computer.
Information on connecting the meter to a PC via RS-232/USB.
Details on using the optional AC power adapter.
Step-by-step guide for replacing the meter's batteries.
Important safety precautions regarding battery disposal and handling.
Lists general technical details of the meter, including display, channels, and power.
Details on resolution, range, and accuracy for Pt 100 ohm RTD input.
Lists resolution, range, and accuracy for various thermocouple types (K, J, T, E, R, S).
Notes on supplied probe range limitations and accuracy considerations.
To Next Page