What to do if my Extech Instruments IR267 display screen is blank?
If your Extech Instruments Thermometer's display screen is blank, the most likely cause is low battery power. You should check the battery and replace it if necessary.
Why is the battery icon flashing on my Extech Instruments IR267?
If the battery icon is flashing on your Extech Instruments Thermometer, it means the battery power is low. Replace the battery to resolve this issue.
How to fix the laser pointer on my Extech Instruments IR267?
If the laser pointer on your Extech Instruments Thermometer isn't working, first ensure that the Laser (LAS) is set to ON in the Settings mode. If it's already on, replace the battery, as a low battery can cause the laser pointer to fail.
What to do if my Extech Instruments IR267 displays an incorrect value?
If your Extech Instruments Thermometer is displaying an incorrect or no value, you may have the wrong measurement function selected. Press the Up/Down arrow to select the correct measurement function.
General| Brand | Extech Instruments |
|---|---|
| Model | IR267 |
| Category | Thermometer |
| Language | English |
Lists key capabilities like non-contact temp, ambient air temp, Type-K input, and laser targeting.
Explains symbols used in the manual for user reference.
Lists crucial safety precautions to avoid hazards and damage.
Details hazardous conditions and actions to prevent device damage or incorrect readings.
Identifies and labels the physical components of the IR thermometer.
Explains the meaning of various icons and data shown on the LCD display.
Explains how the meter is powered and battery status indication.
Details the procedure for measuring surface temperature using infrared.
Explains how to measure ambient air temperature using the built-in sensor.
Describes how to perform temperature measurements using a Type-K thermocouple.
Explains the display indicators for measurements outside the device's specified range.
Provides guidance on how to find temperature anomalies using the thermometer.
Explains the 12:1 field of view and its impact on measurement accuracy.
Explains emissivity setting and its importance for accurate IR measurements.
Provides emissivity values for common materials to ensure accurate readings.
Describes the function and setting of high and low temperature alarms.
Details how to select display modes like MAX, MIN, AVG, and DIFF.
Instructions for turning the LCD backlight and laser pointer on or off.
Guides users through setting high and low temperature alarm limits.
Details the process of adjusting the emissivity setting for accurate measurements.
Explains how to switch between Celsius and Fahrenheit temperature units.
Details how to enable or disable the audible alarm buzzer.
Offers tips and considerations for accurate IR thermometer measurements.
Provides instructions on how to clean the meter and its lenses.
Lists common issues, their causes, and recommended solutions for the IR thermometer.
Guides users through the process of replacing the device's battery.
Lists detailed temp measurement ranges, accuracies, and resolutions.
Provides overall technical specs including operating conditions and dimensions.
To Next Page