IR267‐en‐GB_v1.18/16
3
Safety
InternationalSafetySymbols
Thissymbol,adjacenttoanothersymbolorterminal,indicatestheusermustrefertothe
manualforfurtherinformation
Warnings
o Donotdirectlyorindirectlypointthelaserattheeyesofapersonorananimal
o Inspectfordamageorforanyshortageofpartsoraccessoriesbeforeuse
o Replacethebatteryimmediatelyafterthebatteryindicatorflashes
o Donotconnectanexternalprobetolive
electricalcircuits
o Donotsubmergeinwater
o Donotlea vethethermometeronornearobjectsofhightemperature
o Donotusethethermometernearexplosivegases,steam,ordust
o Note that an object with high reflectivity will normally cause the measured temperature
valuetoread
muchlowerthan theactualtemperature
o UsethedeviceonlyasdescribedinthisUserGuide
Cautions
Toavoidthermometerdamage,pleaseavoidthefollowinghazards:
o EMFfromweldingequipmentorelectro‐inductionheaters
o Staticelectricity
o Thermal shock caused by large or abrupt environmental
temperature changes; wait 30 minutes to allow the
thermometertostabilizetonewenvironmentalconditions
o Donotusethisdevice
inexcessivelyhightemperatureenvironments
o If the meter is to be stored for a long period of time the battery should be removed to
preventdamagetotheunit
<1mW Output at 650nm
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
