EU/UK Version 16 WTH600-E-en-GB_v1.0 4/18
14. HI / LO WEATHER ALERT
The WTH600-E can alert you to specific weather conditions. When the alert function is active, the
amber LED flashes when certain conditions exist; see table below.
Area Types of Alerts Available
Indoor Temperature HI and LO alert
Indoor Humidity HI and LO alert
Outdoor Temperature HI and LO alert
Outdoor Humidity HI and LO alert
Rainfall HI alert (rainfall since midnight)
Wind speed HI alert
Set the HI / LO alert
1. Press the [ALERT] button to select the desired display field.
2. Use [UP] / [DOWN] buttons to adjust the settings.
3. Press [ALERT] button to confirm and continue to the next setting.
Enable/disable the HI / LO Alarm Alert
1. Press the [ALERT] button to select the desired display field.
2. Use [ALARM] to turn the alert on or off.
3. Press [ALERT] to continue to the next setting.
Note:
1. The unit will automatically exit setting mode in 5 seconds if no button is pressed.
2. When ALERT alarm is on, the area and type of alert that triggered the alarm will be flashing and
the alarm will sound for 2 minutes.
3. To silence the Alert alarm beeper, press the [SNOOZE / LIGHT] / [ALARM] button, or allow the
beeper to automatically turn off after 2 minutes.
15. WIRELESS SIGNAL RECEPTION
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
