EasyManua.ls Logo

Extech Instruments WTH600 User Manual

Extech Instruments WTH600
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL
WTH600 - WIRELESS WEATHER STATION
WITH WIRELESS TRANSMITTER SENSOR
1. INTRODUCTION
Thank you for selecting the Extech WTH600 Wireless Weather Station with 5-in-1 wireless sensor.
The sensor includes a self-emptying rain collector for measuring rainfall, an anemometer for wind
velocity, a wind vane for wind direction, a temperature sensor, and a relative humidity sensor. The
WTH600 comes fully assembled and calibrated for convenience. The sensor transmits data up to
492 ft. (150m), line of sight, to the main display unit via low power radio frequency. The main unit
displays all of the weather data received from the sensor and the user can recall stored weather
data (24-periods). The WTH600 is a powerful and unique personal weather station that, with
proper use, will provide years of reliable service.
FEATURES
HI/LO Alarms alert the user when programmed weather limits are exceeded
Barometric pressure is computed and helps forecast the weather and possible storms
Min/Max feature includes date/time stamp
View Rainfall rate and daily/weekly/monthly amounts
Wind-speed levels are shown expressed in Beaufort scale
Wind-chill, Heat Index, Dew point, and Comfort level are computed and displayed
Question and Answer IconNeed help?

Do you have a question about the Extech Instruments WTH600 and is the answer not in the manual?

Extech Instruments WTH600 Specifications

General IconGeneral
BrandExtech Instruments
ModelWTH600
CategoryWeather Station
LanguageEnglish

Summary

Introduction to the WTH600

Physical Descriptions

Main Unit Components

Overview of the main unit components and their functions.

Wireless Sensor Components

Overview of the wireless sensor components and their functions.

Display Descriptions

Main Display Elements

Explanation of the main display elements and indicators.

Indoor Display

Details of the indoor temperature and humidity display.

Outdoor Display

Explanation of the outdoor temperature and humidity display.

Forecast Display

Details of the 12+ hour weather forecast display.

Barometer Display

Explanation of the barometer display and its readings.

Rainfall Display

Details of the rainfall display and its measurement units.

Sensor Installation & Operation

Wireless Sensor Installation

Guidance on installing and setting up the wireless sensor.

Battery Installation

Instructions for installing batteries in the main unit and sensor.

Mounting Guidelines

Recommended practices for mounting the wireless sensor for accuracy.

Main Unit Operation

Initial Setup & Pairing

Steps for initial setup, battery installation, and sensor pairing.

Time Signal & Settings

Information about RC time signal and manual clock setting.

Clock & Alarm Settings

Procedures for setting the clock, time zone, and alarm.

Signal Reception Control

How to disable or enable radio-controlled time signal reception.

Weather Forecast

Barometric Pressure

Display Modes

How to choose between absolute and relative atmospheric pressure.

Setting Relative Pressure

Procedure for setting the relative atmospheric pressure value.

Barometer Units

How to select units for barometer readings (inHg, mmHg, hPa).

Rainfall

Rainfall Display Modes

Options for viewing rainfall data (Rate, Daily, Weekly, Monthly).

Rainfall Units

How to set rainfall units to mm or inches.

Wind Speed & Direction

Wind Display Modes

How to choose between average and gust wind speed display.

Wind Speed Units

How to set wind speed units (mph, m/s, km/h, knots).

Beaufort Scale

Wind Chill, Heat Index, Dew Point

Wind Chill & Heat Index

How to display and interpret wind chill and heat index calculations.

Dew Point (Indoor)

How to display and interpret indoor dew point.

Historical Data

Maximum / Minimum Memory

HI / LO Weather Alert

Setting HI / LO Alerts

Procedure for setting high and low weather alerts.

Alarm Enable/Disable

How to activate or deactivate the HI/LO alarm alerts.

Wireless Signal Reception

Comfort Levels

Comfort Indication

Explanation of the comfort level indicators based on temp/humidity.

Clearing Stray Readings

Pointing Sensor

Moon Phases

Cleaning

Cleaning Rain Collector

Instructions for cleaning the rain collector component.

Cleaning Thermo-Hygro Sensor

Instructions for cleaning the temperature and humidity sensor.

Troubleshooting

Precautions

FCC Statement

Specifications

Warranty

Related product manuals