Extra 200 - Page 241

CHAPTER 34
PAGE 7
EXT
RA - FLUGZEUGBAU GmbH
SERVICE MANUAL EXTRA 200
PAGE DATE: 1. July 1996
34-15-03 Altimeter Removal/Installation
N O T E For removal/installation of the front altimeter refer to
Chapter 31.
1 Remove the instrument cover per Chapter 31 (rear alti-
meter only).
2 Remove the vinyl tube and the tube-to-pipe adapter if
necessary.
3 Remove the attachment bolts and nuts.
4 Remove the altimeter.
5 Install in reverse sequence of removal.
6 Perform an operation test.
34-15-04 Airspeed Indicator Removal/Installation
N O T E For removal/installation of the front airspeed indicator
refer to Chapter 31.
1 Remove the instrument cover per Chapter 31 (rear air-
speed indicator only).
2 Remove the vinyl tubing.
3 Remove the attachment bolts.
4 Remove the airspeed indicator.
5 Install in reverse sequence of removal. Observe cor-
rect installation of vinyl tubing: "Stat. Druck" = static
pressure, "Meßdruck" = Pitot pressure.
6 Perform an operation test.
MAINTENANCE PRACTICES