Need help?Do you have a question about the Extreme Flight 60" Slick 580 ARF and is the answer not in the manual?
General| Wingspan | 60 inches |
|---|---|
| Battery | 6S 3300-4000mah Lipo |
| Material | Balsa and plywood |
| Covering | UltraCote |
| Skill Level | Intermediate to advanced |
| ESC | 80-100 Amp |
| Radio System | 4+ Channel |
Assemble and secure the rudder pull-pull cables to the control horn.
Insert and align the horizontal stabilizer and wing tube using a ruler.
Glue the horizontal stabilizer in place and install the left elevator without hinges.
Test fit, align, and glue the right elevator to the joiner and slot.
Install elevator horn, pushrod, and connect the elevator servo extension.
Secure the motor shaft collar and attach the radial mount to the motor.
Secure the prop adapter and drill motor mounting holes in the firewall.
Install the motor and ESC into the fuselage motor box.
Drill holes at marked locations and secure the cowl with screws.
Check motor rotation, prop, battery, wing bolts, and tune CG using the 45-degree line test.
To Next Page