Need help?Do you have a question about the Extreme Flight 78" EXTRA 300 ARF and is the answer not in the manual?
General| Brand | Extreme Flight |
|---|---|
| Model | 78" EXTRA 300 ARF |
| Category | Toy |
| Language | English |
Tips for reinforcing joints, removing covering wrinkles, fixing dings, and canopy glue.
Recommendations for servos, epoxy, hinge glue, and inspection.
Cutting covering, fitting control horns, marking, scuffing, and epoxying base plates.
Installing hinges with epoxy, loosening with acetone, and sealing hinge gaps.
Installing control horns, servos, extensions, and pushrod linkages.
Sealing wing seams, removing wrinkles, and sealing hinge gaps.
Installing control horns and the ball link into the rudder.
Preparing tailwheel wire and mounting the assembly to the fuselage.
Installing the main landing gear, fairings, and wheels.
Mounting the motor/engine, ESC, and gas engine considerations.
Installing rudder, elevator servos, and pull-pull cables.
Marking, aligning, and drilling holes for cowl mounting.
Securing the canopy/hatch and installing side force generators (SFGs).
To Next Page