Need help?Do you have a question about the Extreme Flight MXS-EXP and is the answer not in the manual?
General| Wingspan | 64 in (1626mm) |
|---|---|
| Weight | 5.5 - 6.0 lbs (2495-2720g) |
| Length | 62.5 in (1588mm) |
| Power System | Electric |
| Power | Electric |
| Recommended Motor | 480-500Kv |
| Recommended ESC | 80 Amp |
| Recommended Battery | 6S |
| Servos | 4 x High Torque |
Assemble the landing gear unit and attach wheels, wheel pants, and carbon fiber gear leg.
Mount the horizontal stab and elevator, ensuring correct orientation and initial insertion.
Install the rudder control horn and secure the rudder to its hinges.
Secure the tailwheel bracket and tiller to the fuselage rear.
Install rudder and elevator servos and their linkages using recommended servo arms.
Mount the motor, propeller adapter, and radial mount using Loctite for secure attachment.
Mount the ESC on the motor box and secure all wires with Velcro or nylon cable ties.
Attach the cowl using masking tape for alignment and secure with small wood screws.
Secure the battery with Velcro and mount the receiver on the battery tray.
Attach optional SFGs or racing wing tips to the wing tips using bolts and spacers.
To Next Page