12 Summit24e3 Switch Quick Reference Guide
disable log display Disables the log display.
disable rmon Disables the collection of RMON statistics on the switch. The
default setting is disabled.
disable syslog Disables logging to a remote syslog host.
enable cli-config-logging Enables the logging of CLI configuration commands to the
Syslog for auditing purposes. The default setting is enabled.
enable log display Enables the log display.
enable rmon Enables the collection of RMON statistics on the switch. The
default setting is disabled.
enable syslog Enables logging to a remote syslog host.
show diag Displays software diagnostics.
show log {<priority>} Displays the current snapshot of the log. Options include:
■ priority — Filters the log to display message with the
selected priority or higher (more critical). Priorities include
critical, emergency, alert, error, warning, notice, info, and
debug. If not specified, all messages are displayed.
show log config Displays the log configuration, including the syslog host IP
address, the priority level of messages being logged locally, and
the priority level of messages being sent to the syslog host.
show memory {detail} Displays the current system memory information. Specify the
detail option to view task-specific memory usage.
show switch Displays the current switch information, including:
■ sysName, sysLocation, sysContact
■ MAC address
■ Current time and time, system uptime, and time zone
■ Operating environment (fans)
■ NVRAM configuration information
■ Scheduled reboot information
Command Description
To Next Page
Loading...
