Part number: 120139-00 Rev. 01 Published: September 2001 1
Summit24e3 Switch Quick
Reference Guide
Accessing the Switch Commands
Command Description
clear session <number> Terminates a Telnet session from the switch.
config account <username> {encrypted}
{<password>}
Configures a user account password. Passwords must have a
minimum of 1 character and can have a maximum of 32
characters. User names and passwords are case-sensitive.
config banner Configures the banner string. You can enter up to 24 rows of
79-column text that is displayed before the login prompt of each
session. Press [Return] at the beginning of a line to terminate the
command and apply the banner. To clear the banner, press
[Return] at the beginning of the first line.
config dns-client add <ipaddress> Adds a DNS name server(s) to the available server list for the
DNS client. Up to three name servers can be configured.
config dns-client default-domain
<domain_name>
Configures the domain that the DNS client uses if a fully qualified
domain name is not entered. For example, if the default domain
is configured to be foo.com, executing ping bar searches for
bar.foo.com.
config dns-client delete <ipaddress> Removes a DNS server.
config ssh2 key {pregenerated} Generates the SSH2 host key.
config sys-recovery-level [none | critical | all] Configures a recovery option for instances where an exception
occurs in ExtremeWare. Specify one of the following:
■ none — Recovery without system reboot.
■ critical — ExtremeWare logs an error to the syslog, and
reboots the system after critical exceptions.
■ all — ExtremeWare logs an error to the syslog, and reboots
the system after any exception.
The default setting is none.
config time <date> <time> Configures the system date and time. The format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You cannot set the year
past 2036.
To Next Page
Need help?
General
