Extreme Networks Summit X460-G2 Series - Page 11

Conformity Statements for EMC Class A
Summit X460-G2 Series Switches Installation Note
11
Summit X460-G2-24t-GE4 Switch I/O Ports and Slots
The Summit X460-G2-24t-GE4 switch ports and slots include:
● 24 front panel ports of 10/100/1000BASE-T (ports 1-24, four of which are shared with SFP ports),
four combo SFP ports, and four dedicated SFP ports (100/10000BASE-X and 100FX), and four ports
of 1G SFP+ (two of these ports are configurable to be stacking ports).
● One front panel USB port.
● One rear panel VIM slot
● One rear panel TM-CLK (clock) slot.
● Dual PSU power slots with front-to-back or back-to-front airflow.
● One slot for fan module with front-to-back or back-to-front airflow.
● Ethernet management port 1 x 10/100/1000BASE-T.
● Serial console port implemented as an RJ-45 connector used to connect a terminal and perform local
management.
Summit X460-G2-24t-10GE4 Switch I/O Ports and Slots
The Summit X460-G2-24t-10GE4 switch ports and slots include:
● 24 front panel ports of 10/100/1000BASE-T (ports 1-24, four of which are shared with SFP ports),
four combo SFP ports, and four dedicated SFP ports (100/10000BASE-X and 100FX), and four ports
of 10G SFP+ (two of these ports are configurable to be stacking ports).
● One front panel USB port.
● One rear panel VIM slot
● One rear panel TM-CLK (clock) slot.
● Dual PSU power slots with front-to-back or back-to-front airflow.
● One slot for fan module with front-to-back or back-to-front airflow.
● Ethernet management port 1 x 10/100/1000BASE-T.
● Serial console port implemented as an RJ-45 connector used to connect a terminal and perform local
management.
Summit X460-G2-48t-GE4 Switch I/O Ports and Slots
The Summit X460-G2-48t-GE4 switch ports and slots include:
● 48 front panel ports of 10/100/1000BASE-T (ports 1-48), and four ports of 1G SFP+ (two of these
ports are configurable to be stacking ports).
● One front panel USB port.
● One rear panel VIM slot
● One rear panel TM-CLK (clock) slot.
● Dual PSU power slots with front-to-back or back-to-front airflow.
● One slot for fan module with front-to-back or back-to-front airflow.
● Ethernet management port 1 x 10/100/1000BASE-T.
● Serial console port implemented as an RJ-45 connector used to connect a terminal and perform local
management.