Need help?Do you have a question about the Extron electronics DXP 88 HD 4K PLUS and is the answer not in the manual?
Lists key features of the DXP HD 4K PLUS Series switchers, including resolution and HDMI specifications.
Describes the rear panel layout and connectors for DXP HD 4K PLUS Series matrix switchers.
Explains the functions of front panel buttons and LEDs on DXP HD 4K PLUS switchers.
Details the front panel operations, including configuration and preset management for these models.
Describes various methods for resetting the DXP, including front panel buttons and SIS commands.
Details how to save the current configuration as a preset and recall previously saved presets.
Explains how to mute or unmute video and audio outputs using the front panel buttons.
Explains how to make input-to-output ties using front panel buttons, SIS commands, or PCS.
Details using the recessed reset button for soft resets on DXP switchers.
Step-by-step procedure for performing a factory default system reset.
Explains how to attach host devices to the DXP via RS-232, LAN, or USB connectors.
Describes the communication process between a host computer and the DXP using SIS commands.
Lists SIS commands, ASCII equivalents, responses, and descriptions for DXP 44, 84, 88.
Lists and explains various error codes returned by the switcher for invalid commands or parameters.
Guides users on how to interpret the SIS command and response tables.
Defines special symbols and abbreviations used in SIS commands and responses.
Explains how to make multiple ties in a single command entry.
Covers SIS commands for setting and viewing input names and HDCP authorization.
Details SIS commands to view EDID information in Hex format from specific input slots.
Explains SIS commands for importing EDID tables to user slots.
Covers SIS commands for exporting EDID tables.
Covers SIS commands for setting and viewing the HDCP mode for outputs.
Details SIS commands to view HDCP status for outputs.
Details SIS commands for muting and unmuting audio outputs.
Explains SIS commands to mute video output to black on a specific output.
Details SIS commands for managing input-to-output ties on the DXP 42.
Provides step-by-step instructions for installing the Extron Product Configuration Software (PCS).
Step-by-step guide for uploading and installing firmware updates.
Details the interface for configuring network settings like IP address, subnet mask, and DHCP.
Lists key features of the DXP HD 4K PLUS Series switchers, including resolution and HDMI specifications.
Describes the rear panel layout and connectors for DXP HD 4K PLUS Series matrix switchers.
Explains the functions of front panel buttons and LEDs on DXP HD 4K PLUS switchers.
Details the front panel operations, including configuration and preset management for these models.
Describes various methods for resetting the DXP, including front panel buttons and SIS commands.
Details how to save the current configuration as a preset and recall previously saved presets.
Explains how to mute or unmute video and audio outputs using the front panel buttons.
Explains how to make input-to-output ties using front panel buttons, SIS commands, or PCS.
Details using the recessed reset button for soft resets on DXP switchers.
Step-by-step procedure for performing a factory default system reset.
Explains how to attach host devices to the DXP via RS-232, LAN, or USB connectors.
Describes the communication process between a host computer and the DXP using SIS commands.
Lists SIS commands, ASCII equivalents, responses, and descriptions for DXP 44, 84, 88.
Lists and explains various error codes returned by the switcher for invalid commands or parameters.
Guides users on how to interpret the SIS command and response tables.
Defines special symbols and abbreviations used in SIS commands and responses.
Explains how to make multiple ties in a single command entry.
Covers SIS commands for setting and viewing input names and HDCP authorization.
Details SIS commands to view EDID information in Hex format from specific input slots.
Explains SIS commands for importing EDID tables to user slots.
Covers SIS commands for exporting EDID tables.
Covers SIS commands for setting and viewing the HDCP mode for outputs.
Details SIS commands to view HDCP status for outputs.
Details SIS commands for muting and unmuting audio outputs.
Explains SIS commands to mute video output to black on a specific output.
Details SIS commands for managing input-to-output ties on the DXP 42.
Provides step-by-step instructions for installing the Extron Product Configuration Software (PCS).
Step-by-step guide for uploading and installing firmware updates.
Details the interface for configuring network settings like IP address, subnet mask, and DHCP.
General| Video Bandwidth | 18 Gbps |
|---|---|
| HDMI Support | Yes |
| 3D Support | Yes |
| Audio Switching | Yes |
| Maximum Data Rate | 18 Gbps |
| HDCP Support | HDCP 2.2 |
| Color Depth | Up to 12-bit |
| EDID Management | Yes |
| Video Inputs | 8 |
| Video Outputs | 8 |
| Resolution Support | Up to 4K @ 60 Hz (4:4:4) |
| Audio Inputs | 8 |
| Audio Outputs | 8 |
| Control | RS-232, Ethernet |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions | 4.4 cm x 44.5 cm x 25.4 cm |
| HDMI Features | Deep Color |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10% to 90%, noncondensing |
To Next Page
