Need help?Do you have a question about the Extron electronics DXP HD 4K PLUS Series and is the answer not in the manual?
General| Brand | Extron electronics |
|---|---|
| Model | DXP HD 4K PLUS Series |
| Category | Switch |
| Language | English |
Information about the installation, configuration, and operation of the DXP HD 4K PLUS Series matrix switchers.
Overview of high-performance HDMI matrix switchers supporting 4K@60Hz and HDMI 2.0b.
Extracts embedded HDMI audio to digital S/PDIF and analog stereo audio outputs.
Manages EDID communication, ensuring sources power up properly and reliably output content.
Describes the rear panel connections and features of the DXP HD 4K PLUS Series matrix switchers.
Details the function of input connectors, output connectors, reset button, RS-232 port, and LAN port.
Explains key terms used in the guide, such as Tie, Set of Ties, Configuration, and Global Preset.
Details the function of front panel buttons, LEDs, HDCP, and signal status indicators.
Explains how to attach host devices via RS-232, LAN, or USB connectors for configuration.
Describes the SIS command structure and communication protocol between host and switcher.
Provides steps to download and install the Extron Product Configuration Software (PCS).
Explains how to connect PCS to the switcher using the Device Discovery or TCP/IP panel.
Covers UL guidelines for rack mounting and procedures for DXP 44, 84, 88, and DXP 42 models.
Guides users on how to download and install firmware updates from the Extron website.
Explains IP addresses, subnet masks, and network configuration for the DXP switcher.
To Next Page
