Need help?Do you have a question about the Extron electronics ISM 824 and is the answer not in the manual?
General| Brand | Extron electronics |
|---|---|
| Model | ISM 824 |
| Category | Switch |
| Language | English |
Alerts user to important operating and maintenance instructions in the literature.
Alerts user to uninsulated dangerous voltage posing a risk of electric shock.
Turn off power to input and output devices and remove power cords.
Connect RGB, component, S-video, or composite video to BNC connectors.
Connect stereo or mono audio to 5-pin captive screw connectors.
Connect display devices to BNC connectors for pass-through or output cards.
Connect audio devices to 5-pin captive screw output connectors.
Connect a control system or computer to the RS-232/RS-422 port.
Guide to creating connections between inputs and outputs on the front panel.
Step-by-step instructions for adjusting picture settings like color, brightness, and detail.
Instructions for saving and recalling I/O configurations to/from memory addresses.
Provides information on the manual's content for installation, configuration, and operation.
Introduces the ISM 824, its capabilities, and its modular design.
Lists and briefly describes ISM RGB Universal Scaler, VS Video Scaler, SC Scan Converter, 1WB, and 2WB cards.
Describes the types of video/audio inputs and the standard/optional outputs supported.
Highlights 3:2 pulldown detection and switching flexibility including audio follow/breakaway.
Details features like Auto Image, Test Patterns, Blue Mode, Film Mode, Auto Memories, Aspect Ratios, Presets, Freeze, and Pass-through.
Details features like Auto Image, Blanking, Edge Smoothing, Blue Mode, 2:2 Pulldown, Enhanced Mode, Auto Memories, Presets.
Describes Dual and Single Output Wideband cards for unprocessed signal pass-through.
Lists Underwriters Laboratories (UL) requirements for safe installation and operation.
Provides instructions for rack mounting or tabletop placement of the ISM 824.
Identifies and describes the connectors and ports on the rear panel of the ISM 824.
Lists UL requirements for safe installation of equipment in a rack environment.
Explains the AC power connector and the remote port for serial control.
Overview of the controls and indicators on the ISM 824's front panel.
Describes the start-up sequence and display cycle after applying power to the unit.
Explains the function of input and output selection buttons for tying and preset operations.
Step-by-step guide for creating connections between inputs and outputs.
Demonstrates adding an audio tie from input 8 to outputs 3 and 4 to existing video ties.
Demonstrates removing video ties from outputs 2 and 7.
Demonstrates replacing the video tie from input 2 to input 7 for output 1.
Step-by-step instructions for muting a specific output signal via the front panel.
Instructions on how to view current input audio gain and output volume settings.
Instructions for saving the current configuration to one of the sixteen I/O preset locations.
Describes how to use the Auto Image feature to automatically size and center inputs.
Outlines the submenus for configuring the Universal Scaler card.
Details the connection and pinout for serial control via the rear panel 9-pin D connector.
Describes the 2.5mm mini jack port for RS-232 configuration.
Explains connecting to an Ethernet LAN/WAN for SIS control using a computer.
Lists messages the switcher sends to the host upon events like power-up or front panel operations.
Introduces the tables that define SIS commands and responses for control.
States the factory-specified default IP address for accessing the switcher.
Defines symbols used in switcher-initiated messages and command/response tables.
Describes the copyright message displayed upon initial power-on.
Explains messages for input selection, video type, format, refresh rate, and polarity.
Details messages generated by front panel adjustments to color, tint, brightness, contrast, size, etc.
Defines symbols and parameters used in IP SIS commands for various settings.
Introduces the Windows-based software for configuring and operating the ISM 824.
Describes the software for creating custom labels for front panel buttons.
Step-by-step guide for installing the software from the provided CD-ROM.
Lists options for connecting, disconnecting, managing files, and exiting the control program.
Lists options for data tracing, device images, executive mode, group settings, and updates.
Instructions for creating input to output ties using drag-and-drop functionality.
Steps for removing input to output ties by dragging to a waste bin icon.
Instructions on disabling or enabling auto memory for input presets.
Steps for saving and recalling user presets (1-3) for output card configurations.
Instructions for saving input settings to memory locations via SIS commands.
Instructions on disabling or enabling auto memory for input presets.
Steps for saving and recalling user presets (1-3) for Video Scaler card.
Instructions for saving input settings to memory locations via SIS commands.
Instructions on accessing the ISM 824 via HTML pages using a web browser.
Describes the System Status page for viewing firmware, output cards, and serial port settings.
Explains access to system settings, ISM settings, passwords, email, and firmware upgrades via web pages.
Details how to upload or delete files, such as HTML pages or logo bitmaps, from the multiswitcher.
Describes pages for configuring ties, volume, mute, auto image, freeze, presets, and output card settings.
Lists characters reserved by HTML that are not accepted in certain ISM 824 fields.
Details how to view and edit IP address, DHCP, Gateway, Subnet, and Unit Name settings.
Steps for configuring e-mail addresses and host PC file names for alert messages.
Instructions for enabling SMTP authorization for sending e-mail.
Allows basic configuration of ties, volume, mute, freeze, and auto image settings.
Details settings for the Universal Scaler card, including ties, picture controls, input sampling, and presets.
Explains connecting the ISM 824 to an Ethernet LAN or WAN for SIS control.
Provides a basic understanding of TCP/IP subnetting concepts for network interaction.
States the factory-specified default IP address for accessing the switcher.
Explains how to use the Ping utility to find the switcher's IP address.
Explains using the Ping utility with the -a modifier to find the Web IP address.
Instructions for connecting to the ISM 824 using the Telnet utility via DOS prompt.
Details how to initiate a Telnet connection to the ISM 824 using the Open command.
Clarifies the difference between the Telnet escape character and the computer's Escape key.
Instructions on how to close the Telnet link to the switcher.
Describes how to access Telnet command definitions and exit the utility.
Explains the structure and valid ranges of IP addresses and their octets.
Lists detailed technical specifications for the ISM 824's video, audio, and sync functions.
Provides part numbers for the ISM 824, included parts, and optional output cards.
Specifies signal types, connectors, levels, impedance, and return loss for main unit video inputs.
Details decoder and digital sampling specifications for the ISM RGB and VS scaler cards.
Specifies signal types, connectors, levels, and impedance for wideband outputs.
Lists sync input/output types, standards, levels, impedance, and polarity for main unit and ISM RGB card.
Details sync input/output types, standards, levels, impedance, and polarity for the ISM VS card.
Details signal types, connectors, impedance, levels, and gain adjustment for audio inputs/outputs.
Details serial host control ports, baud rates, pin configurations, Ethernet port, and data rate.
To Next Page
