Extron electronics ISM 824 - Command;Response Table for SIS Commands (Continued)

4-17
ISM 824 Integration Scaling Multiswitcher • SIS
™
Programming and Control
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web) (host to switcher)
Response (switcher to host)
Additional description
Vertical size
Specific value
X@*X1&; X@%2AX1^ ;
X@
Vsz
X!*X1&]
Sets vertical sizing to
X1&
.
Increment value
X@+; X@+; X@
Vsz
X!*X1&]
Make the window taller.
Decrement value
X@-; X@-; X@
Vsz
X!*X1&]
Make the window shorter.
View
X@; X@; X1&]
Show vertical sizing value (is X1^)
.
Zoom mode
Zoom in
X@+{ X@+{
X@
Zom
X!*X5$*X1&*X1&]
Zoom in, making the window larger.
Zoom out
X@-{ X@-{ X@
Zom
X!*X5$*X1&*X1&]
Zoom out, making the window smaller.
View
X@{ X@{ X@
Zom
X!*X5$*X1&*X1&]
View zoom status.
Size/position conguration
Set size and position
Esc
X@,X1^*X1^*X1&*X1&XY} WX@,X1^%2AX1^%2AX1&
%2A
X1&XY}
X@
Win
X!*X1^*X1^*X1&*X1&]
Sets both the size and position of output
X@ with a single
command
.
N The variables need to be in the following order: horizontal position, vertical position, horiziontal size, and vertical size. View size and position
Esc
X@XY} WX@XY} X1^*X1^*X1&*X1&]
View size and position of ouput
X@
.
Output conguration
Output scaler rate
Set output rate
X@*X2!*X2@ =
X@%2AX2!%2AX2@ =
Rte
X@*X2!*X2@]
Select output resolution and refresh rate.
View output rate
X@ = X@ =
X2!*X2@]
Show selected output rate.
Output sync format
Set sync format
6*
X@*X2$#
6%2A
X@%2AX2$# X@SynX2$]
Select output sync format.
View output rate
6*
X@# 6%2AX@# X2$]
Show the selected output rate.
Output polarity
Set polarity
7*
X@*X\#
7%2A
X@%2AX\ # X@Pol X\] X\
: 0 = H-/V- (default)
1 = H-/V+ 2 = H+/V+ 3 = H+/V+
View setting
7*
X@# 7%2AX@# X\]
View the currently set output polarity.