Extron electronics ISM 824 - Command;Response Table for SIS Commands (Continued)

4-15
ISM 824 Integration Scaling Multiswitcher • SIS
™
Programming and Control
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web) (host to switcher)
Response (switcher to host)
Additional description
Active pixels
Specify a value
12
*X@*X* #
12%2A
X@%2AX* # X@
Apx
X!*X*]
Adjust the active pixels to a specified value.
Increment value
12
*X@+#
12%2A
X@+# X@
Apx
X!*X*]
Increase the value.
Decrement value
12
*X@-#
12%2A
X@-# X@
Apx
X!*X*]
Decrease the value.
View
12
*X@#
12%2A
X@# X*]
Show the active pixels.
Active lines
Specify a value
13
*X@*X( #
13%2A
X@%2AX( # X@
Aln
X!*X(]
Adjust the active lines to a specified value.
Increment value
13
*X@+#
13%2A
X@+# X@
Aln
X!*X(]
Increase the value.
Decrement value
13
*X@-#
13%2A
X@-# X@
Aln
X!*X(]
Decrease the value.
View
13
*X@#
13%2A
X@# X(]
Show the active lines.
Input aspect ratio
16:9
9
*X@*1#
9%2A
X@%2A1#
X@
Asp
X%*1]
Set input aspect ratio 16:9.
4:3
9
*X@*0#
9%2A
X@%2A0#
X@
Asp
X!*
0
]
Set input aspect ratio 4:3.
View
9
*X@#
9%2A
X@# X1)]
View the current aspect ratio setting.
Picture adjustments
Video mute
Enable blanking
X@*1B
X@%2A 1B X@
Vmt
1
]
Blanks selected output.
Disable blanking
X@*0B
X@%2A 0B X@
Vmt0
]
Displays selected output.
View
X@B X@B X1)]
View the blanking status.
Color
Specify a value
X@*X1%C
X@%2AX1% C X@
Col
X!*X1%]
Sets color level to
X1%
.
Increment value
X@+C X@+C X@
Col
X!*X1%]
Increase color level.
Decrement value
X@-C X@-C X@
Col
X!*X1%]
Decrease color level.
View
X@C X@C X1%]
View current setting.
Tint
Specify a value
X@*X1%T
X@%2AX1% T X@
Tin
X!*X1%]
Sets tint level to
X1%
.
Increment value
X@+T X@+T X@
Tin
X!*X1%]
Increase tint level.
Decrement value
X@-T X@-T X@
Tin
X!*X1%]
Decrease tint level.
View
X@T X@T X1%]
View current setting.