DXP HD 4K PLUS Series • Configuration Software 85
Offline Device Preview
Opening a new device tab for an offline device displays the interface and configuration
options for the chosen model without connecting to it. However, settings cannot be
changed.
To open a switcher device tab:
1. In the Start-up drop-down menu, select New Configuration File. The New
Configuration File dialog box opens.
Figure 44. Configuration File Drop-Down Menu
NOTE: The Open Configuration File option is not available for the
DXP HD 4K PLUS Series.
Figure 45. New Configuration File Dialog Box (DXP 88 HD 4K PLUS Selected)
2. Select the desired device model from the Device Models list (see figure 45,
1
).
3. Click the Configure button (
2
). A new offline device configuration tab opens.
44
45
To Next Page
Loading...
