Extron electronics DXP HD 4K PLUS Series - Date;Time Settings Panel

DXP HD 4K PLUS Series • Internal Web Page 91
Updating firmware
NOTE: If necessary, download firmware updates from www.extron.com.
To update the firmware, click the Update button in the Device Info panel. The Firmware
Update dialog box opens.
Figure 51. Firmware Update Dialog Box
To update the firmware:
1. Click the Browse button. The File Upload dialog box opens.
2. Navigate to the location of the firmware file. Valid firmware files have an .eff extension.
3. Select the file and click the Open button. The File Upload dialog box closes.
4. Click the Upload button. The Firmware Update dialog box closes.
While the firmware is being updated, status messages are displayed, indicating when
the firmware is uploading, initializing, then installing. The DXP reboots, then displays a
message indicating that the firmware update is complete.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
Date/Time Settings Panel
The Date/Time Settings panel (see figure48,
5
, on page 87) displays the date and
time on the device and provides options to set the device date and time automatically or
manually.
Updating date and time automatically
This method sets the device date and time to the same date and time of the PC. To do this,
click the Sync to PC button in the Date/Time Settings panel.
Updating date and time manually
With this method, each value of the date and
time must be set. To edit the date and time
manually, click the Set Manually button in the
Date/Time Settings panel (see
1
in the figure
at right). The Date and Time Settings dialog
box opens.
51