Extron electronics DXP HD 4K PLUS Series - Downloading Updated Firmware

DXP HD 4K PLUS Series • Internal Web Page 95
Device Info Panel
The Device Info panel (see figure54,
1
, on the previous page) displays device name,
brief product description, and part number, with the option to edit the device name. The
panel also contains an Extron link which opens www.extron.com in a new window.
Setting the device name
To edit the device name (TCP/IP hostname), click the Edit button in the lower-left corner of
the Device Info panel. The Device Info Settings dialog box opens.
Figure 55. Device Info Settings Dialog Box
To change the name:
1. Click on the default name in the Device Name field (see figure 55,
1
). A cursor
appears. (The default name is the model name followed by -xx-xx-xx, where
xx-xx-xx are the last six characters of the unit MAC address.)
2. Enter a name for the DXP 42.
3. Click Save to apply the new name and close the dialog box, or click Cancel to close
the dialog box without renaming the device.
Inputs Panel
The Inputs panel (see figure54,
2
) displays the name and signal type of the active input
signal as well as its HDCP status.
The following HDCP status indicators may be displayed for the inputs:
Symbol Definition
The signal is HDCP encrypted.
The signal is not encrypted.
No Signal
There is no signal detected.
To view the status and type of all inputs, click the link (named 2 More) in the lower-left corner
of the Inputs panel to view the Inputs dialog box (see figure56 on the next page for an
example).
55