DXP HD 4K PLUS Series • Configuration Software 82
Software Connection
Open PCS from the Start menu or desktop shortcut. The Extron PCS window opens with
the Device Discovery panel open. Connect to the switcher using the Device Discovery
panel or the TCP/IP panel.
NOTE: Connecting to PCS returns the switcher to normal operation from power save
modes 1 and 2.
Figure 41. PCS Window
Offline device configuration is not supported with the DXP HD 4K PLUS Series, but the
configuration screens and panels can still be viewed.
NOTES:
• PCS versions prior to 2.0 do not have the Device Discovery feature. If possible,
update the PCS version from the Extron website. If that is not possible, connect
to the switcher by choosing the connection method and submitting the required
information in the current PCS version.
• Verify that the current version of PCS supports the desired device by reviewing the
software Release Notes, also available on the Extron website.
41
To Next Page
Loading...
