Extron electronics DXP 88 HD 4K PLUS - Page 80

DXP HD 4K PLUS Series • SIS Configuration and Control 72
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Information Requests (continued)
View model name
1I
DXP•42•HD•4K•Plus]
Verbose modes 2 and 3:
Inf01*DXP•42•HD•4K•Plus•Series]
View the name of the DXP
model.
View model description
2I
DXP•42•HD•4K•Plus•Series]
Verbose modes 2 and 3:
Inf02*DXP•42•HD•4K•Plus•Series]
View a brief description of
the DXP model.
View part number
N 60-1678-01
View the DXP 42 part
number.
View firmware version
Q
X2%]
View current firmware
version X2%.
View firmware and build version
*Q
X2%.nnnn]
View the firmware version
and build number.
KEY:
X2% = Firmware version
n.nn
The firmware build number is X2%.nnnn, where nnnn is the build
number.
IP Control Port Commands
IP Setup
Set DHCP mode
24
EX#DH} IdhX#]
Enable or disable DHCP.
View DHCP mode
EDH} X#]
View the DHCP mode
setting.
Set IP address
24
EX3)CI} Ipi•X3)]
Set the IP address.
View IP address
ECI} X3)]
View the current IP
address.
Set subnet mask
24
EX3!CS} Ips•X3!]
Set the subnet mask.
View subnet mask
ECS} X3!]
View the subnet mask
setting.
KEY:
X# = Enable or disable
0 = Disable DHCP mode (default), 1 = Enable DHCP mode
X3) = IP address
nnn.nnn.nnn.nnn (192.168.254.254 = default)
X3! = Subnet mask
nnn.nnn.nnn.nnn (255.255.0.0 = default)