Eyecon EC1500 - RESOLUTION AND DELAY SETTINGS

11
PLEASE REGISTER TO ACTIVATE YOUR PRODUCT’S WARRANTY.
RES: This setting selects the resolution at which you would like the camera
to take the pictures. A higher resolution photo requires more storage. Options
are: 5MP,7MP,or9MP.
To set the RESOLUTION: Use the + or –arrows to scroll down until a black
box appears around the photo “Resolution” setting. Press the set button
until one of the three Res options changes to a white box with black letters.
Use the + or –arrows to select the desired Res setting. Press the setbutton
again until the setting you selected switches back to the black box with white
letters. You have now locked in your Res setting and have returned to the
cameraoptionscolumn.
DELAY: This setting selects the trigger delay at which you want to run your
camera. This is the amount of time between each set of bursts. Options are: 10
seconds,30seconds,1minuteor5minutes.
To set the DELAY: Use the + or – arrows to scroll down until a black box
appears around the activation “Delay” setting. Press the setbutton until one
of the three Delay setting changes to a white box with black letters. Use the
+ or –arrows to select the desired Delay setting. Press the setbutton until
the setting you selected switches back to the black box with white letters.
You have now locked in your Delay setting and have returned to the camera
optionscolumn.
To exit the Camera Setup Menu, use either the + or –arrows until “Back to
Main Menu” has a black box around it. Press the SET button to return to the
original full color usersetupscreen. Next you will see two options to choose
from. Press either the + or –arrowsuntil “View Photos” starts to ash. Then
press the SET button to enter and view your photos. NOTE: If the camera has
not taken any photos or videos, a screen will appear that says “No Image.”