16
PLEASE REGISTER TO ACTIVATE YOUR PRODUCT’S WARRANTY.
CAMERA CARE
Moisture,vibration,and extremetemperature can cause severe damage
to your trail camera and should be avoided. Keeping your camera free from
moisture and vibration and using in the correct temperatures will assure you
many years of maintenance free service and operation.
MOISTURE: Although all Eyecon™TrailCameras have a very durable
plastic composite case which also makes them water resistant even under
the most extreme weather conditions, care must be taken to prevent water
damage.
•
NEVER mount your trail camera upside down or leave the case open for an
extended period of time.
•
NEVER change batteries, camera settings or SD cards in heavy rain.
•
If your camera would happen to get water inside, remove the batteries
immediately and allow the camera to dry out for several days before activating it.
VIBRATION: Like any electronic device your Eyecon™TrailCamera is
designed with many small electronic components that are very sensitive to
vibration. Failure to follow careful handling & transport may cause extreme
and irreparable damage to your camera.
•
NEVER drop the camera on a hard surface
•
ALWAYS transport your camera in a method to avoid bouncing around or
vibration.
TEMPERATURE:
Recommended storage and operating temperature: -10°F to 120°F.
NOTE: Battery life and functions may discontinue or experience shortness in
extreme cold/warm temperatures.
•
NEVER store your camera in a vehicle or other contained environment with
extremely high temperatures for an extended period of time!