EZ-ACCESS PASSPORT Installation Manual

Page|9
FIG. 4.5
9. Install the guard walls with smooth side toward inside of platform as shown (FIG. 4.6
).
a. Loosen the two set screws in each platform corner pocket as needed to fully engage the guard wall
posts and tighten all set screws securely after the guard walls are installed.
Make sure guard wall with two holes in top rail is installed closest to the tower as shown (FIG. 4.7).
FIG. 4.6 FIG. 4.7

EZ-ACCESS PASSPORT Specifications

General

Brand	EZ-ACCESS
Model	PASSPORT
Category	Lifting Systems
Language	English