Page | 2
INSTRUCTIONS
Passport
®
Top Landing Gate Hinge Replacement
ATTENTION INSTALLER:
• For residential use only!
• Read all instructions, labels, and product warnings prior to use.
• Please leave this ASSEMBLY MANUAL
with the end user.
ATTENTION END USER:
• Read all instructions, labels, and product warnings prior to use.
TOOLS TYPICALLY REQUIRED:
• 5/32″ Allen Wrench
• 3/16″ Allen Wrench
• #2 Phillips Head Screw Driver Or Phillips Drill Head
• Level
• Rubber Mallet
VIEW PACKING LIST:
• Each system is shipped with a packing list. Be sure to check that all items are present before starting
assembly/installation.
To Next Page
Loading...
Need help?
General
