Failures and solutions
13
Failure Causes Solutions
The scooter has no power
Power switch not in right position
Battery is not connected correctly
Battery has low power
Put the Power switch is in the ON position
Re-connect the battery plug
Charge the battery
Brake handle is blocked
The scooter does not accelerate
Throttle handle failure
Place the brake handle at the right
position Change handlebar if damaged
Insufficient mileage
The battery is not fully charged
Under inflated tire
Heavily overloaded
Brake pads interference Battery
is aging or normal scrap
Charge the battery
Check the tire pressure and inflate if needed
Keep the appropriated load
Check the brake system before driving
Replace battery
Battery cannot be charged
The charger is not plugged in Ambient
temperature too high or too low
Check if the plug is loose
Charging the battery in normal conditions
The instrument cannot display
Scooter without power
Displayer is broken
Charging the battery in normal conditions
Contact after-sales, replace parts
USB without power
The plug is not plugged in properly
The USB is damaged
Check if USB plug is loose
Contact after sales, replace parts
To Next Page
Loading...