7
4 Battery use and charging
Battery installation and use
open the seat barrel with key and make
sure the circuit breaker lever is in the
ON position.
Tip: if you do not use the scooter for a
long time, you should turn the circuit
breaker to the OFF position.
Then put the battery into the battery
compa
rtment and Insert the discharge
plug into the discharge port, replace
the seat cushion, and confirm that the
seat barrel lock has been locked.
Warning
It is strictly forbidden to short
circuit the battery fuse Nonmaintenance
personnel are strictly prohibited from
wiring the discharge cables；
Description of battery power indicator
1：In the charging state, the indicator
will show the current power.
2：In the non-charging state, pressing
th
e battery indicator button will display
the battery electricity. (A flashing red
light indicates low power and the battery
should be charged)
Battery usage environment
· The a
mbient temperature of the battery
is -20 ~ 60 ℃. Avoid water, beverages
or corrosive liquids into the battery.
· Don’t put the battery near fire and
flammable and explosive gas liquids,
otherwise it may cause deflagration or
explosion.
· Please avoid foreign matter such as
metal powder entering the battery,
otherwise it will cause a short circuit and
make the battery over heat or explode.
· If the battery has a strange smell,heat,
deformation during use, please stop
using it immediately and contact our
after-sales personnel for inspection and
repair.
To Next Page
Loading...