Need help?Do you have a question about the Ezodo PL-700PC and is the answer not in the manual?
Detailed specifications for pH and ORP measurements, including range, accuracy, and resolution.
Step-by-step guide for calibrating the pH measurement function.
Procedure for calibrating Conductivity, TDS, and Salt measurement modes.
Instructions for calibrating the Dissolved Oxygen (DO) sensor.
Steps for performing pH measurements after calibration.
Procedure for taking ORP readings using the meter.
How to measure Conductivity, TDS, and Salt levels with the instrument.
Detailed steps for performing Dissolved Oxygen (DO) measurements.
General| pH Resolution | 0.01 pH |
|---|---|
| pH Accuracy | ±0.01 pH |
| mV Resolution | 1 mV |
| Temperature Resolution | 0.1 °C |
| Data Logging | Yes |
| pH Range | 0.00 to 14.00 pH |
| mV Range | -1999 to 1999 mV |
| Temperature Range | 0.0 to 100.0 °C |
To Next Page
